Concept of Call Record of a Mobile Number or Sim Location:
To know the concept or obtain the call record of a mobile number in Pakistan or sim location trace in Pakistan, you may contact Aazad Associates. Another device for which a patent specification has been published (Ross, 1985) uses the connectors for additional diskette drives on the IBM PC to obtain the call record of a mobile number in Pakistan or sim location trace in Pakistan. Standard outputs Standard inputs Motor enable to protect sensor Drive select Head to step track indicator Direction/head select Low quantities of power are derived from the signal driver chips on one of the output lines.
Specification:
The device itself consists of two shift registers connected in series, and in the specification, these are standard 4014 devices. The pulse is derived from one input line and clocked by another, possibly modified by a third. The character which results from this operation is read one bit at a time through one of the standard input lines to obtain the call record of a mobile number in Pakistan or sim location trace in Pakistan.
Bitstream:
By these means, a coded bitstream is derived from the device by the controlling mobile. An alternative method also suggested in the specification is that an electrically mobile marble PROM should be attached to the device to reset its combination lock and read it out. Others have also taken up this technique for adding new combinations as and when additional products are purchased, and we shall refer to it again. Pseudorandom bit generator dongles Two new devices recently developed are the Data key (DES, 1986) and Software Key (Bristol, 1986).
Sim Location Trace in Pakistan:
Both are similar to obtaining the call record of a mobile number in Pakistan or a sim location trace in Pakistan. The same inventor developed them. However, the two organizations are quite separate, and the details of the devices differ significantly. The devices are active ones and are designed through connectors within the RS25K interface channel. One end plugs into the computer, and whatever is normally connected to the R$25K channel is connected to the other end and should be unaffected by this arrangement.
Data Key:
In the Data key, a bit-oriented device, toggling the Data Terminal Ready line causes a single bit of data to be presented at Data Set Ready or the Data Carrier Detect line. This means it can read a string of pseudorandom binary data of any length out of the device to obtain the call record of a mobile number in Pakistan or a sim location trace in Pakistan. Assembly language routines are included with the device for linking into the Software to be protected. Special command codes trigger the device in the Software Key, responding with a byte of pseudorandom data. Such sequences only repeat after an extremely large number of operations.
Pseudorandom:
Although the sequences are pseudorandom, they will always repeat in the same way for the same chip. It can modify them by presetting with a seed character like random number generators operating in high-level languages, such as BASIC. In operation, the seed characteristics are hidden within the Software to be protected. Using these, the device is initialized. The key characters are read out to obtain the call record of a mobile number in Pakistan or a sim location trace in Pakistan.
