Door maintenance of commercial property is one of the most important factors that contribute to a well-presented business premise as well as good security. It is not mandatory to replace manual doors, but as a business, automatic door installation is a sure way to make people happy during their visit.
Although it should be obvious from the continuous stream of people passing by a commercial door every day, these elements are sure to get wear and tear. Thus, you can find the tips from this stunning article, if you want to prevent your doors from getting repairs and shield them from damage.
1. Look for Hindrances & Obstruction
For the long-lasting performance of doors, it is necessary to identify and avoid hindrances and obstructions that interfere with their functions.
For instance, to prevent the doors from too much rust and pieces of dirt that might be hindering the door from opening, it is better to clean off the dirt blocking the door.
2. Put on Lubrication On a Regular Basis
Regular lubrication and greasing are the surest ways to ensure that the door joints always work like new, even when they’re fully used. Dry nuts and bolts provide hot areas where moisture and corrosion are likely to appear.
Such areas are proved to be the most fragile and will gradually jam with friction. So, do some lubrication of all hinges with the use of lubricants. It makes those annoying sounds disappear.
3. Focus On Regular Tighten Hardware
High-intensity use of Commercial Door Maintenance Services leads to frequent part failures. Eventually, the screws and ties will be loose. Thankfully, tools such as a wrench and probably a screwdriver of some sort will suffice every two months. Regular tightening of all the hardware used will make it more durable for a long time of use.
4. Install Door Bumpers
One of the best ways to avoid an accidental dent in your door is to install door bumpers. They protect your commercial door from hitting the frame or wall at a high speed.
They not only make your door last longer, but they also reduce damage to the door frame and the wall behind it.
5. Check the Weather-Stripping
Weatherstripping is one of the installation products that runs at the bottom of the commercial door when it is well-closed. This guarantees that the stripping rubs on the floor at all times, picking up dirt and dust along the way.
When they dry out, they become brittle, break up into pieces and crumble off. You must ask for full replacement instead of opting for repairs when showing signs of damage.
6. Maintain the Door Frame
Door frames are vital elements in your commercial doors. If the door frame gets damaged, the doorframe will also be damaged. Hence, you will need to give special care to the entire commercial doors, including your door jams, and remove any dust and debris from the door frame.
If the work is beyond repair, talking to a professional door repair service provider or automatic door installers, on the other hand, will be required.
