Nighthawk router is one of the best WiFi devices ever known to boost the existing internet signals, letting users complete their daily task, stream online videos, and complete games without any hassle on their connected devices. Though the device perform well after Netgear Nighthawk setup 70% of the users reports that their router is not working smoothly and got stuck when searching for the firmware update. If you are also one of those, then this post would be of great help to you. In this article, you will get fixes to troubleshoot Nighthawk firmware update stuck problem in no time. Let’s start over!
What to Do If Nighthawk Router Firmware Update Stuck?
The latest and up-to-date Netgear Nighthawk firmware update boosts the performance of router in no time. At times, the firmware update process got stuck and might ages to download and install. The points outlined underneath will ring up the curtains from the causes behind firmware update stuck issue in a fly. Keep scrolling down!
First, let’s make you familiar with the cause behind the issue, shall we? And along with that, we will provide you solutions as well.
Causes Behind Nighthawk Router Firmware Update Stuck Issue
When you perform the Nighthawk firmware update process, you must keep the points highlighted below into consideration:
- The computer or laptop you are using might not have the enough space to download and install the latest firmware version. To prevent this, delete some unwanted data from your device and try installing the up-to-date version of firmware for your router again.
- You have not downloaded the correct firmware version for your router’s model. To cope up with the issue, make sure to download the correct firmware file.
- Your Nighthawk device and modem are not connected. So, ensure to connect them properly using an Ethernet cable. Once you’re done, login to Nighthawk routerto check the Ethernet connection between your devices.
- You are not following the correct firmware update steps. Simply, make sure that you are following the Netgear router firmware update process in exact given order.
- You are not connected to your router’s WiFi. So, to get rid of firmware update stuck issue, make sure that you are connected to your home WiFi instead of public or free hotspot.
Bonus Tip: Download the Nighthawk router app and get the most out of your Netgear device.
On the off chance if the Nighthawk router troubleshooting tips outlined above didn’t helped you out, then resetting the device back to the factory default values would be a great help to you. Keep scrolling down!
To reset Nighthawk router, follow the steps in exact order mentioned below:
- Disconnect your Nighthawk router from the modem and other connected devices in your home (if connected). Do not unplug your router from the main power outlet. During the Nighthawk router reset process, your device must receive continuous and steady power supply.
- Then, to reset Nighthawk router, locate the reset hole on your device and once found, press it gently with the help of a paper clip or pin.
- Keeping holding the Nighthawk router reset hole till the power LED on the device starts blinking.
- Thus, your Nighthawk router has been reset back to its factory settings successfully.
Now, it is suggested to perform the Netgear Nighthawk setup process again. For this, you have to login to Nighthawk router using routerlogin.net web address and follow the instructions given on-screen.
The Bottom Line
We hope that the tips provided in this article have helped you out in fixing the firmware update stuck issue. We are waiting for your valuable feedback. And if you need assistance regarding the same, do not hesitate to drop your queries into the comments section.
